{"id":13137,"date":"2026-10-07T08:00:00","date_gmt":"2026-10-07T05:00:00","guid":{"rendered":"https:\/\/saunum.com\/?p=13137"},"modified":"2026-09-21T15:13:44","modified_gmt":"2026-09-21T12:13:44","slug":"how-do-you-create-good-loyly-with-an-electric-sauna-heater","status":"publish","type":"post","link":"https:\/\/saunum.com\/en\/blog\/how-do-you-create-good-loyly-with-an-electric-sauna-heater\/","title":{"rendered":"How do you create good l\u00f6yly with an electric sauna heater?"},"content":{"rendered":"

To create good l\u00f6yly with an electric sauna heater, use small amounts of water poured slowly and steadily onto hot stones, ensure your heater reaches the right temperature before throwing water, and choose a heater with strong air circulation. The quality of your l\u00f6yly depends as much on how the steam moves through the room as it does on the water you throw. The sections below answer the most common questions about getting the best electric sauna steam possible.<\/p>\n

What makes l\u00f6yly feel soft and breathable?<\/h2>\n

L\u00f6yly feels soft and breathable when the steam is evenly distributed at a comfortable humidity level and mixed with enough oxygen-rich air. Harsh, suffocating steam usually means the hot vapor is concentrated near the ceiling while cooler, drier air sits at floor level, creating an uneven and uncomfortable experience for bathers.<\/p>\n

Good l\u00f6yly is not just about temperature, it is about balance. When steam rises and stays trapped at the top of the sauna, bathers breathe in superheated air that can feel sharp and difficult to tolerate. When that same steam is blended back down with cooler air, it becomes gentler on the airways and easier to enjoy for longer sessions. The result is a sauna that feels nourishing rather than punishing, encouraging deeper relaxation and more intense sweating without discomfort.<\/p>\n

Why does an electric heater produce harsher steam than a wood-burning one?<\/h2>\n

Electric heaters tend to produce harsher steam because their stones heat up more quickly and to higher temperatures, which can cause water to flash-evaporate too fast. Wood-burning saunas heat stones more gradually and retain heat more evenly across a larger stone mass, which naturally produces a softer, more layered steam.<\/p>\n

This does not mean electric heaters cannot produce excellent l\u00f6yly, it means the technique and heater design matter more. A wood-burning kiuas has the advantage of thermal mass built up over hours of burning, while an electric heater reaches temperature faster but with less stone depth in many standard models. Choosing an electric heater with a generous stone capacity and good heat retention goes a long way toward closing that gap. Pouring water correctly also plays a significant role, which is covered in the section below.<\/p>\n

How does air circulation affect l\u00f6yly quality?<\/h2>\n

Air circulation directly determines how evenly steam spreads through the sauna room. Without active circulation, hot steam rises and pools near the ceiling while the lower half of the room stays cooler and drier. Good air movement blends these layers together, creating a consistent temperature and humidity level from floor to ceiling.<\/p>\n

In a poorly ventilated sauna, the temperature difference between the ceiling and the floor can be dramatic, sometimes more than 20 degrees Celsius. This means bathers sitting at bench level are not experiencing the full warmth of the l\u00f6yly, while anyone who stands up briefly is hit by an intense wave of heat. Proper air circulation solves this by continuously redistributing the steam so every part of the room feels balanced. This is why heater design, not just stone quality, plays such a central role in the overall sauna experience.<\/p>\n

How much water should you throw on an electric sauna heater?<\/h2>\n

For an electric sauna heater, pour small amounts of water, roughly 50 to 100 milliliters at a time, slowly and in a steady stream directly onto the hottest stones. Throwing too much water at once causes the stones to cool rapidly and produces a harsh, heavy burst of steam rather than the gentle, sustained l\u00f6yly that makes for a great sauna session.<\/p>\n

Patience between throws matters just as much as the amount. Waiting 30 to 60 seconds between each pour allows the stones to recover their heat and the steam to distribute through the room before adding more. Here are a few practical tips for getting the technique right:<\/p>\n